Manual Dimming Control - Elation KL FRESNEL 6 CW User Manual

M A N U A L D I M M I N G C O N T R O L
u FEATURE IS DISABLED WHEN DMX INPUT CABLE IS CONNECTED TO FIXTURE!
TO USE MANUAL DIMMING KNOB, DISCONNECT DMX CABLE IF CONNECTED.
Follow steps below to enable manual DIMMING control knob.
1. Access fixture system menu navigating to Test menu then access ManCtrl sub menu.
Reset.M
Calibrat
Test
ManCtrl
NOTE: To access the LCD Menu Control Display when locked/OFF, press and hold the
MODE button for 3 seconds.
2. Select Stobe menu, set to value of 255 (LED ON), then exit fixture system menu.
3. Push DIMMING knob to unlock, rotate to desired level, push knob again to lock.
Repeat this process each time a dimmer adjustment is desired.
LCD DISPLAY
DMX CABLE CONNECTED
Zoom
PassWord Password=050
Zoom 000-255
Dimmer, Zoom, Strobe
17
Reset Zoom Motor
Calibrate Zoom Motor
(PSWD Required to Access)
Manual Control Functions
NO DMX CABLE CONNECTED