Leica A60 F User Manual page 16

Table Clamp
Instructions for safe assembly
The table clamp is designed for tabletops
with a thickness of up to 100 mm.
Before assembly, ensure that the
selected tabletop can carry the weight.
Otherwise persons can be injured and the
stereomicroscope and the specimen can be
damaged.
Leica A60 F User Manual
Assembling the table clamp
1. Push the table clamp over the tabletop as
far as it will go.
2. Tighten the two screws.
3. Insert the flexarm into the table clamp.
Assembling the Leica A60 F
Adjusting the table clamp
If the table clamp does not fit the thickness
of the tabletop, it can be adjusted. To do so,
unscrew the two screws and move the loose
part of the clamp upwards or downwards.
16