Install; Install The Unit; Remove The Unit - DP Audio Video DP434 User Manual

Install

INSTALL THE UNIT

Before installing the receiver, find the most suitable place for it in your car. Make the necessary speaker and electrical connections.
Once your receiver is connected properly, follow the installation instructions.
1.Use the two keys to remove the bracket
from the unit, as in Figure (1).
2.Put the bracket into the installation space.
3.Bend the tabs to secure the bracket, as in Figure (2).
4.Put the unit into the installation space via the bracket,
until the unit is fixed well, as in Figure(3).

REMOVE THE UNIT

Insert the keys into the small gaps in the right
and left sides of the unit at the same time. Once
the keys catch the unit, gently pull out the unit,
and then disconnect the wiring.
Figure 2
Figure 1
5 5
Installation bracket
Figure 3
The installation hole with bracket