Advertisement
Quick Links
Advertisement
Related Manuals for DK Digital PU-700
Summary of Contents for DK Digital PU-700
-
Page 2: Battery Replacement
Battery replacement The battery compartment is located on the back of the device. Ø In order to open it, press lightly on its cover and push it in the direction of the arrow. Ø Remove the used batteries, if necessary. Ø... - Page 3 Setting the time and date Ø Press the SET key. When the seconds flash you can reset them by pressing the UP key. Ø If you press the MODE key, the hours start flashing. Press the UP key repeatedly or keep it pressed until the desired number of hours is displayed.
-
Page 4: Setting The Alarm
Setting the alarm Ø Press the MODE key once. alarm time for just 10 seconds. Ø If you press the SET key during that time, the hours of the alarm time flash and you can set them to the required time by pressing the UP key. The time format corresponds to the format you have chosen when setting the time. - Page 5 Ø In order to activate this function, press the MODE key twice; 0-00 00 appears in the display. Ø If you press the SET key, the hours will flash. Press the UP key until the required hour is shown. Ø If you press the MODE key again, the minutes will flash.
- Page 6 Stop watch You can also use this device as a stop watch with a 1/100 second precision. Ø Press the MODE key three times - Ø Press the TIMER key in order to start the time measurement. If you press the TIMER key again, the measurement is stopped.
-
Page 7: Waste Disposal
Waste disposal Ø When the operating life of this device has ended it must not be disposed as domestic waste, but in acc or dan ce wi th na ti on al environmental guidelines. - Page 8 We reserve the right to correct errors and make technical alterations. This manual is copyrighted. All rights reserved. Neither the manual as a whole nor excerpts may be reproduced without our prior written permission. DK digital AG 40878 Ratingen Germany www.dk-digital.com...