Related Manuals for DK Digital PU-500
Summary of Contents for DK Digital PU-500
- Page 2 Battery replacement The pendulum clock has two battery compartments. The battery in the right compartment is responsible for displaying the time, the one in the left compartment for the movement of the pendulum. So if the time display is not showing, replace the right compartment battery or if the pendulum has stopped moving, replace the left.
- Page 3 Setting the time and date Ø Press the SET key three times. When the seconds flash you can reset them by pressing the UP key. Ø If you press the SHIFT key, the minutes start flashing. Press the UP key repeatedly or keep it pressed until the desired number of minutes is displayed.
- Page 4 Ø In order to show the date during normal time display, press the UP key. If you release the key, time is shown again. Controlling the alarm function Ø Press the SET key twice. The alarm time hours will flash and you can set them to the desired value by pressing the UP key.
- Page 5 Chime The device can issue a short beep on the hour, every hour. Ø To activate or deactivate this function when normal time is displayed, hold down the SHIFT key and additionally press the SET key once. Ø If the days of the week are shown in a frame, the function is active.
-
Page 6: Waste Disposal
Ø In order to reset the stop watch to the Up key and then press the STOP key. Waste disposal Ø When the operating life of this device has ended it must not be disposed as domestic waste, but in acc or dan ce wi th environmental guidelines. - Page 8 We reserve the right to correct errors and make technical alterations. This manual is copyrighted. All rights reserved. Neither the manual as a whole nor excerpts may be reproduced without our prior written permission. DK digital AG 40878 Ratingen Germany www.dk-digital.com...