Replacing The Interior Lamp; Adjusting The Legs - Blomberg SSM 9640 A+ Operating Instructions Manual

Replacing the interior lamp

Should the light fail to work, proceed
as follows.
1. Switch off at the socket outlet
and pull out the mains plug.You may
find it useful to remove shelves for
easy access.
2. Use a flat tipped screwdriver to
remove the light diffuser cover.
3. First check that the lamp
hasn't worked loose by ensuring it
is screwed securely in the holder.
Replace the plug and switch on.
4. If the lamp works, replace the
light cover by inserting the rear lug
and pushing up to locate the front
two lugs.
5. If the light still fails to work, switch
off at the socket outlet and pull out
the mains plug. Replace the lamp
with a new 15 watt (max) screw cap
(SES) lamp.
6. Carefully dispose of the burnt-out
lamp immediately.
7. Replacement light lamp can
easily be obtained from a good local
electrical or DIY store.
Usage area measures

Adjusting the legs

If your refrigerator is unbalanced;
You can balance your refrigerator by
turning its front legs as illustrated in the
figure. The corner where the leg exists is
lowered when you turn in the direction
of black arrow and raised when you
turn in the opposite direction. Taking
help from someone to slightly lift the
refrigerator will facilitate this process.
11
EN