Asus WS C422 DC Manual page 30

10. ATX power connectors (24-pin EATXPWR; 8-pin EATX12V2)
These connectors are for ATX power supply plugs. The power supply plugs are
designed to fit these connectors in only one orientation. Find the proper orientation and
push down firmly until the connectors completely fit.
Ensure to connect the 8-pin power plug.
•
•
1-18
For a fully configured system, we recommend that you use a power supply unit
(PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a
minimum power of 350 W.
We recommend that you use a PSU with a higher power output when configuring a
system with more power-consuming devices. The system may become unstable or
may not boot up if the power is inadequate.
Chapter 1: Product Introduction