High Security Disarm; Disarming Without A Transceiver; 2002 Directed Electronics, Inc - Directed Electronics 544T Owner's Manual

high security disarm

This security system offers High Security Disarm. High Security
Disarm is a feature that makes it possible to silence and reset the
system while it is triggered, without disarming the system. If the
system is triggered and the siren has been sounding for longer
than six seconds, press any button on the transceiver to stop the
page, then press on the transceiver to stop the trigger and
return the unit to the armed state. The system will not disarm,
but rather reset. This prevents you from disabling the system
should you wish to disarm it without visually checking the
vehicle. Pressing after resetting the system will disarm the
system. Pressing any button to clear the transceiver page and
within the first six seconds will stop the trigger response and
disarm the system. The six second timer is there for your conve-
nience in case the system was accidentally triggered.
disarming without a transceiver (emergency override)
If your transceiver is lost or damaged, you can manually disarm
your vehicle security system. To disarm the system without a
transceiver, you must have the vehicle's ignition key and know
where the Valet switch is located. Be sure to check with your
®
installer at the time of installation for both the location and the
preset response (1-5 presses) of the Valet
© 2002 directed electronics, inc.
switch.
®
25