LG F1258FD Owner's Manual page 17

H ow to use washer
Once you have loaded the washer and added
laundry products (detergent, bleach, and/or fabric
softener):
❶ Press the ON/OFF button to turn on the
washer. The lights around the
cycle selector knob will
illuminate.
❷ Turn the cycle selector knob to the desired
cycle. The display will show the
preset WASH, RINSE, SPIN,
TEMP. and Option settings for
that cycle.
❸ If you would like to change the settings for
that cycle, press the appropriate cycle
settings button(s) until the indicator light for
the desired setting is lit.
NOTE: To protect your garments, not every
WASH, RINSE, SPIN, TEMP. or option is
available with every cycle.
❹ Select any additional cycle options, such as
NOTE: To protect your garments, not every
WASH, RINSE, SPIN, TEMP. or option is
available with every cycle.
OPERATING THE WASHER
ADD LOAD or DELAY
WASH by pressing the
button for that option.
❺ Press the START/PAUSE button to begin the
cycle. The door will latch, the
display will change, and the
washer will calculate the
estimated time remaining. Once the washer
has calculated the estimated total cycle time,
the washer will start. To pause the cycle at
any time, press PAUSE.
NOTE: The cycle time displayed may appear
much longer than that of a top-loading
washer. The displayed time is for the
complete cycle, rather than just the agitation
portion of the cycle, as is typically shown on a
top-loading washer.
NOTE: If the temperature in the washer is too
high, the door cannot be unlocked until the
washer has cooled. If the water level is too
high, select the SPIN cycle to drain excess
water. Do not try to force the door
open.Washing time can be reduced
significantly for small or lightly soiled loads by
selecting the Speed Wash cycle and setting
the Soil Level button to Light.
❻ When the load is finished, the beeper (if set)
will sound and the door will unlock.
Remove damp clothes from the washer
immediately. Check under the door seal for
small items.
17