Avital AviStart 6000 Owner's Manual page 12

To Remote Start the Engine
1. Press the remote control START button for 1-2 seconds, 10-15 minutes
before you enter your vehicle (this will allow the climate control time to
heat or cool the interior.) The parking lights will flash 2 times, the engine
will start and the parking lights will remain on as a visual indication that
the engine is running. Five seconds after the engine starts, the doors will
automatically lock. If you do not want the doors to automatically lock
upon remote start, this feature (Security Start Locks™) can be programmed
OFF. (See the "Programming Table for Systems Features" on page 14.)
If you have a diesel engine, the AviStart will be programmed to start 15
seconds after the parking lights flash 2 times. This will allow time for the
glow plugs to heat up. The alarm system will remain armed.
2. If the engine does not remote start, the AviStart system will attempt to start
the engine two additional times.
3. If the vehicle is left unattended, the engine will run for 20 minutes and
then shut off automatically. You can also program the system to run the
engine for 30 minutes. (See the "Programming Table for System Features"
on page 14.)
To Operate the Vehicle While Remote Started
1. If the alarm system is armed, press the remote ARM/DISARM button for
1-2 seconds. The alarm will disarm and the doors will unlock.
2. Enter the vehicle (do not touch the brake pedal), turn the ignition key to
the "ON" position and then press the brake pedal. Pressing the brake pedal
will shut off the remote start and parking lights but the engine will remain
running.
3. You can now drive the vehicle.
To Shut Off Remote Start
At any time while the engine is remote started, you can shut off the engine
with the remote control by pressing the remote control START button for 1-2
seconds. The engine and parking lights will shut off.
10
AviStart 6000 Owner's Manual