Vermont Castings Defiant 1975-CAT-C Installation & Operating Manual page 16

Distance from the Center of the Flue Collar to the Wall in Top-Exit Installations
The information on this page is helpful in planning stove placement for top-exiting installations, particularly those installations
with chimneys that pass through the ceiling. However, this is not a clearance chart. Final stove clearances must adhere to
the guidelines stated in the clearance chart on Page 14.
Dimensions indicated are valid for installations with either 6" or 8" flue collars.
Unprotected Surface
Parallel Installations
Side (A)
36-1/2" (927 mm) 21" (533 mm)
Side (A)
36-1/2" (927 mm) 21" (533 mm)
A
*
* This distance, from the center of the flue collar to the front edge of the hearth, is the same for all installations on this page:
34" (865 mm) in the United States and 36" (914 mm) in Canada.
16
Vermont Castings • Defiant® Model 1975-CAT-C Installation Manual_R12 • 11/21
Single Wall - No Connector Heat Shields
Corner
Installations
Rear (B) Corner (C)
16" (406 mm)
Double Wall Connector
Rear (B) Corner (C)
16" (406 mm)
B
C
Parallel Installations
Side (D)
20-1/2" (521 mm)
Side (D)
20-1/2" (521 mm)
D
*
ST511
Defiant
Flue Centerline
Diagrams
04/19
Protected Surface
Installations
Rear (E) Corner (F)
9" (229 mm) 16" (406 mm)
Rear (E) Corner (F)
9" (229 mm) 16" (406 mm)
E
Corner
F
8390-975