Cleaning The Water Inlet Filter - Miele WCR 890 WPS Operating Instructions Manual

Cleaning and care

Cleaning the water inlet filter

The washing machine has a filter to
protect the inlet valve. The filter in the
screw connection of the water inlet
hose should be cleaned approximately
every 6 months, or more often if there
are frequent interruptions to the external
water supply.
70
 First turn off the tap.
 Unscrew the inlet hose from the tap.
 Remove the rubber seal 1 from the
recess.
 Using combination or pointed pliers,
take hold of the plastic filter bar 2 and
remove it.
 Clean the filter and the seal.
Reassemble the filter and seal in the
reverse order and reconnect the hose.
The filter must be put back in place
after cleaning.
 Screw the threaded union securely
back onto the tap.
 Turn on the tap.
Make sure there is no water leaking
from the threaded union.
Tighten the threaded union.