Setting The Clock Format; Removing The Transit Bars - Miele WCR 890 WPS Operating Instructions Manual

3. Setting the clock format

The time of day display can be in 12 h
or 24 h clock format.
 Select the clock format you want and
confirm this with the OK sensor.
The display will then bring up the
screen for setting the time of day.
Setting the time of day
This message only appears if the
washing machine has not yet been
connected to a Wi-Fi network.
The time of day is set automatically if
connection is established with a Wi-Fi
network.
Clock display
 Place your finger on the number that
you want to change and move your
finger in the direction you want.
 Confirm with the OK sensor.
14 02
13 01
12 00
11 59
10 58
Before using for the first time

4. Removing the transit bars


Damage resulting from failure to
remove the transit bars.
Failure to remove the transit bars can
result in damage to the washing
machine and to adjacent cabinetry or
appliances.
Remove the transit bars as described
in "Installation and connection".
 Confirm that the transit bars have
been removed with the OK sensor.
The following message appears in the
display:

Remove transit bars and observe
"Warning and Safety instructions" and
"Before using for the first time" in the
operating instructions
 Confirm the message with the
sensor.
The display will then change to the
screen for setting up TwinDos.
OK
.
OK
21