DESCRIPTION
5.
CLUTCH - Turns drive sprocket when engine rpm is fast enough to
provide the power needed for cutting.
Preparation For Use
Saw chain is sharp! Always wear gloves when handling
assembly, otherwise serious personal injury may result.
Note: The machine may be delivered with guide bar, and saw chain
separated. Install guide bar, saw chain, and optional Kick
TM
Guard
Instructions to Install Optional Kick Guard
Tools Needed: Two 11 mm (7/16 in.)
Wrenches.
Install bolt (A) in rear hole (B) of Kick
1.
TM
Guard
and through front hole (C) in
guide bar.
2.
IMPORTANT: Dimple (D) in Kick
TM
Guard
must engage recess (E) in
guide bar.
3.
Securely tighten nut (F) and bolt (A).
22
as follows.
CS-2511T
TM
to Bar
Optional
A
TM
Kick Guard
D
E
C
F
X7503332503
© 11/19 ECHO Incorporated
B