Figure 16. Remove by pulling the M.2 solid-state drive – Lenovo Legion Y740–17
Remove the coin-cell battery
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 33
"Remove the battery pack" on page 34
"Remove the M.2 solid-state drive" on page 36
Note: For Lenovo Legion Y740–17, you have to remove the solid-state drive before removing the RTC
battery.
Step 1.
Disconnect the cable from the system board.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
Figure 17. Disconnect the cable – Lenovo Legion Y740–15
38
Hardware Maintenance Manual