BT Freestyle 1025 User Manual page 32

Your additional handset must be placed on the base
unit within 5 seconds of the IN USE light flashing.
To re-register an additional handset
Before re-registering, the old
registration code must first be erased.
If necessary you can re-register your
additional handset by simply following
the above procedures.
Check that your additional handset is registered
correctly by pressing the TALK button and listening
for a dial tone. If you do not hear a dial tone your
additional handset is either out of range of the base
unit or it has not been registered properly, or the base
unit line cord is not plugged in.
To set the handset number
Each additional handset must be
assigned an identity number (2, 3 or 4).
Your Freestyle 1025 handset is already
numbered as HANDSET 1. Additional
handsets can then be numbered as they
are added.
Your Freestyle additional handset is pre-set
to handset number 2.
28
NOTE
NOTE
NOTE
To set a handset identity number
Press the
QUICKDIAL
Quickdial
Secrecy Press the
SECRECY
Enter the identification number
KEYPAD
using the keypad.
When you have entered the number,
Quickdial
press the
QUICKDIAL
You will hear a beep confirming that
the new number has been stored.
NOTE
Make a note of the identification number by writing
it on the handset's directory label.
button.
button.
(2-4)
button.