D-Link DWL-AG650 Manual page 11

Getting Started
Setting up a Wireless Infrastructure Network
For a typical
wireless setup at
home (as shown
here), please do
the following:
You will need broadband Internet access (a Cable or DSL-subscriber
line into your home or office).
Consult with your Cable or DSL provider for proper installation of the modem.
Connect the Cable or DSL modem to your broadband router (see the
Quick Installation Guide included with your router).
If you are connecting a desktop computer to your network, you can
install the D-Link Air Premier AG
Adapter into an available PCI slot on your desktop computer. You may
also install the DWL-A520, DWL-G520 or other compatible D-Link
Wireless PCI Adapter.
(See the Quick Installation Guide included with the network adapter).
Install the D-Link DWL-AG650S Wireless Cardbus Adapter into a laptop
computer.
(See the Quick Installation Guide included with the DWL-AG650S).
If you wish, you may connect a computer that is equipped with an
Ethernet network adapter (such as a DFE-530TX+) to the router also.
A RADIUS server is optional. Connect a RADIUS server to your network
to use all the features of WPA. (Without a RADIUS server you can still
use the WPA Pre-Shared Key mode.) RADIUS Authentication can also
be provided by another service provider over the Internet and remote to
your network site.
7 7 7 7 7
6 6 6 6 6
2 2 2 2 2
3 3 3 3 3
TM
DWL-AG520S Wireless PCI
1 1 1 1 1
4 4 4 4 4
DWL-AG520 DWL-AG520
DWL-AG520 DWL-AG520 DWL-AG520
5 5 5 5 5
DWL-AG650 DWL-AG650
DWL-AG650
DWL-AG650 DWL-AG650
with Laptop PC with Laptop PC with Laptop PC
with Laptop PC with Laptop PC
S S S S S
S S S S S
11