Download
Share
Print this page
D-Link AirPremier DWL-7700AP Quick Installation Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Wireless Access Point
  5. AirPremier DWL-7700AP
  6. Quick installation manual
D-Link AirPremier DWL-7700AP Quick Installation Manual

D-Link AirPremier DWL-7700AP Quick Installation Manual

Wireless ag outdoor ap/bridge
Hide thumbs Also See for AirPremier DWL-7700AP:

Advertisement

Quick Links

Download this manual See also: Command Line Interface Reference Manual, User Manual
This product can be set up
using any current web
browser,
i.e.
Explorer or Netscape
Navigator.

Before You Begin

It's best to use a computer (with an Ethernet adapter) connected to a switch to configure
the DWL-7700AP. The default IP address for the DWL-7700AP is
subnet mask of 255.255.255.0 on the wired Ethernet side. You will need to assign your
computer a static IP address within the same range as the DWL-7700AP's IP address for
the purpose of configuring the DWL-7700AP. If you need assistance assigning a static
IP address to your network adapter, please refer to the manual on the CD-ROM.
Check Your Package Contents
©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
Internet
DWL-7700AP Wireless AG Outdoor AP/
Bridge
CD-ROM (Containing Manual and Warranty)
Two Dipole Antenna
Surge Arrestor
specifications subject to change without notice. DWL-7700AP. 12012004
DWL-7700AP
D-Link AirPremier
Wireless AG
Outdoor AP/Bridge
192.168.0.50
®
with a

Advertisement

loading

Related Manuals for D-Link AirPremier DWL-7700AP

Summary of Contents for D-Link AirPremier DWL-7700AP

  • Page 1: Before You Begin

    IP address to your network adapter, please refer to the manual on the CD-ROM. Check Your Package Contents ©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DWL-7700AP. 12012004...
  • Page 2 Check Your Package Contents (continued) PoE base unit RF jumper cable 30M Ethernet cable Grounding wire Power cord Power Adapter 8 Screws and rubber ring...
  • Page 3 Check Your Package Contents (continued) Mounting Option A Mounting Option B If any of the above items are missing, please contact your reseller. Mounting Kit Mounting Kit Wall Mount Screws...
  • Page 4 Important Information authorities. Failure to do so may void the D-Link product warranty and may expose the end user or the service provider to legal and financial liabilities. D-Link and its resellers or distributors are not liable for injury, damage or violation of regulations associated with the installation of outdoor units or antennas.
  • Page 5 Physical Installation for your DWL-7700AP Step 1: Connect the supplied Ethernet cable with the waterproof enclosure to the Ethernet port on the DWL-7700AP and attach the grounding wire.
  • Page 6 Physical Installation for your DWL-7700AP (continued) Step 2: Install the two dipole antennas to the antenna connector, and attach the grounding wires.
  • Page 7 Physical Installation for your DWL-7700AP (continued)
  • Page 8 Physical Installation for your DWL-7700AP (continued) Step 3: Install the mounting kits. You can select between two mounting options. Mounting Option A:...
  • Page 9 Physical Installation for your DWL-7700AP (continued) A complete DWL-7700AP with Mounting Option A should look like this.
  • Page 10 Physical Installation for your DWL-7700AP (continued) Mounting Option B: A complete DWL-7700AP with Mounting Option B should look like this.
  • Page 11 Step 2: Connect the remaining end of the supplied Ethernet cable (Connected to the DWL-7700AP in Step 1 on page 4) to the P+ DATA OUT port on the PoE base unit. Step 3: Connect an Ethernet cable from a router/switch or PC to the DATA IN port on the PoE base unit.

  • Page 12: Using The Setup Wizard

    Using The Setup Wizard Open your Web browser and type http://192.168.0.50 URL address box. Then press the Enter or Return key. The logon pop-up screen will appear. Type admin for the username and leave the password field blank. Click Once you have logged in, the Home screen will appear.
  • Page 13 Using The Setup Wizard (continued) You will see the following screens. Click Next Step 1 - Set up your new password. You have the option to establish a password. Click Next Step 2 Set Wireless LAN 802.11a Connection Enter the desired SSID and the channel that you wish to use here.
  • Page 14 Using The Setup Wizard (continued) Step 3 WEP Encryption for 802.11a The DWL-7700AP is capable of three levels of wireless encryption 64-bit, 128-bit and 152-bit. By default encryption is disabled. You can change the encryption settings for a more secure wireless network.
  • Page 15 Your Setup is Complete! Click Restart When you have completed the steps in this Quick Installation Guide, your connected network should look similar to this. AP Mode:...
  • Page 16 Your Setup is Complete! (continued) Bridging Mode:...
  • Page 17 If you are using an 802.11a connection, the external gain antenna attaches to the right side of the DWL-7700AP when the front panel (D-Link) is facing towards you. If you are using an 802.11g connection, the external gain antenna attaches to the left side of the DWL-7700AP when the front panel (D-Link) is facing towards you.
  • Page 18 Notes...
  • Page 19 Notes...

  • Page 20: Technical Support

    Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link Technical Support through our website, or by phone.