Rear Camera Operation - (Optional) - Jensen VX7228 Installation & Owner's Manual

VX7228 OPERATION
Front 3.5mm Aux Input & Rear RCA A/V Input
Auxiliary Input Connect an optional audio source into the 3.5mm (front panel)
input.
Select auxiliary input from the Main Menu to listen to audio.
Adjust volume on the external audio source as needed (if
connected to the headphone output of the device).
Using AV Input
Connect an optional audio/video source to the rear auxiliary
input (Red/White/Yellow RCA connectors). Refer to page 6 for
details.
Select AV Input from the Main Menu to listen to audio.

Rear Camera Operation - (Optional)

Connect an optional rear camera to the Camera Input (Black RCA
Using Rear Camera
connector). Refer to the wiring diagram for details.
Manual selection - Touch CAMERA icon from the Main Menu or
from any operational mode (when enabled) to select camera
mode. Touch the top left area on the screen to exit camera
mode.
Note: The manual mode is for dedicated cameras that are
ALWAYS on while driving, it is not meant for cameras that are
connected to the vehicle's reverse light.
The unit will automatically select camera mode when connected
24