Table of Contents
Advertisement
Figure 21. Installing the storage drive and the bracket
5. Connect the signal cable and the power cable to the new storage drive.
6. Reinstall the removed parts. To complete the replacement, see "Completing the parts replacement" on
page 55.
Replacing the optical drive
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove the computer stand. See "Replacing the computer stand" on page 16.
2. Remove the computer cover. See "Removing the computer cover" on page 18.
3. Replace the optical drive.
Figure 22. Removing the optical drive
.
Chapter 4
Replacing hardware
21
Advertisement
Table of Contents
