Using additional handsets
and bases
Up to six handsets can be registered and
operated from any one base. This allows you
to make internal calls between two handsets
while a third is making an external call.
Each handset can be registered on up to four
bases.
Each additional handset you purchase must
be registered to a base.
Your handset supplied is pre-registered
(as Handset 1) to its base (as Base 1).
The following base stations and handset
types are in the BT On-Air range.
BT On-Air 1100 Classic
BT On-Air 1100 Executive
BT On-Air 1200 Classic
BT On-Air 1300 Executive
BT On-Air 1000 Classic handset and charger
BT On-Air 1000 Executive handset and
charger
BT On-Air DECT f@x Plus
If you purchase new handsets to use with
your current BT On-Air 1100, they will not be
pre-registered to a base station. You will need
to do this before you can use them.
At the base:-
Press and hold down the
on the base until it starts to flash.
On the handset:-
Use the
button to scroll to BASE .
Press
to confirm.
The display will show REGISTER .
Press
to confirm.
Use the
or
scroll to AUTOMATIC .
Press
to confirm.
The display will now flash SEARCHING
FOR BASE .
After a few seconds the handset will
be registered and display:
BASE 1
HANDSET 2
button
buttons to
22