Preliminary Position; Minute And Second Hands) - Seiko C-18 Instructions Manual

P ress t he but t on and
2
then release it
T he second hand moves to the zero second position
and stops.
The watch switches to the manual time setting mode.
※ P ress the button
with a pointed
object. → P.94
Press
the button
and then
release it
※ W hen this condition is kept for one minute or more,
7
the watch automatically switches to the time
display mode. When the watch switches to the
time display mode, re-attempt operation from ① .
※ W hen the watch switches to the manual time
setting mode, the reception result data is lost.
Therefore, the reception result is indicated as N.
142
Preliminary position
When the time are not correct even if the radio signal reception is
successful, the preliminary position of the date may be misaligned.
The possible causes of misalignment of preliminary position are as follows:
・ I n the case of having a strong impact: the misalignment may occur
when dropping or hitting the watch.
・ I n the case of a magnetic infl uence: the misalignment may occur when
bringing the watch close to an object which generates magnetism.
→ Examples of magnetic products that may aff ect watches P.125
The condition the preliminary position of hand is misaligned means that compared to a health meter,
the zero position of a meter is misaligned, causing a correct weight not to be displayed.
■ A utomatic hand position adjustment function (function to automatically
adjust the preliminary position of the hour, minute, and second hands)
The hour, minute, and second hands have an Automatic Hand Position Adjustment
Function, which automatically corrects an incorrect preliminary position.
7
Automatic Hand Position Adjustment Function activates once an hour for the
minute and second hands and at 12:00 both for AM and PM for the hour hand.
※ T his function works when the preliminary hand position is misaligned due to external factors such as strong impact or magnetic
infl uence. It does not work to adjust accuracy of the watch or slight deviations which may occur during the manufacturing process.
144
Press the button to set the
3
time
B y pressing the button once, the second hand makes a full
rotation and the watch advances the time by one minute.
When the
button is kept
pressed for
two seconds,
the second
Pressing
hand starts to
the button once
move. When
advances the
the button is
time by one
pressed again,
minute.
the second
hand stops.
※ The hands do not move by turning the crown.
※ A dvance the hand to set the time. The hand
cannot be turned reversely.
※ The date is changed at 0:00 a.m. (12:00 a.m.).
Pay attention to a.m. and p.m. to set the time.
※ The date cannot be set in this operation.
→ How to manually set the date P.144
After the operation ③ pull the
4
crown to the second click.
Pulling
0 1
the crown
to the second
click
Push the crown back in
5
according to the time signal, etc.
The operation is completed.
The watch starts to work.
0 Pushing
the crown
back in
※ W hen the crown is
a screw lock type,
lock it. → P.95
When the watch is used in an environment in which
a radio signal can be received again, receive a radio
signal to set the time.
→ Automatic reception and manual reception P.99
7
143
7
145