Web-Based Management - D-Link DVG-1402S User Manual

Web-based Management

Prior to using your Web browser for Web-based management, if DHCP is not
enabled on your computer, be sure to assign a static IP address to the VoIP
Router.
Go to Start>Control
Panel>Network
Connections>Right-click local
area connection >select
Properties> double click Internet
Protocol (TCP/IP). The screen at
right will appear.
The VoIP Router's LAN port comes
with DHCP as default IP setting. If the
VoIP gateway cannot get the
assigned DHCP IP, it will use the
manual IP (default is 192.168.15.1 )
as it's default IP.
Set your PC's IP address to
192.168.15.15 and the subnet mask
to 255.255.255.0.
In order to use a Web browser to configure the VoIP Router you must make
sure it has a valid Ethernet connection to a PC or LAN via its LAN port.
Access the configuration utility to check the LAN port by entering the IP Address
into your web browser address field.
Type 192.168.15.1
(the IP Address) into
the address field of
your browser.
192 . 168 . 15 . 15 192 . 168 . 15 . 15 192 . 168 . 15 . 15 192 . 168 . 15 . 15 192 . 168 . 15 . 15
255 . 255 . 255 . 0 255 . 255 . 255 . 0 255 . 255 . 255 . 0 255 . 255 . 255 . 0 255 . 255 . 255 . 0
22