D-Link DSL-G604T User Manual page 60

Configure Multiple SSID
Multiple SSID cannot be used if the access point has either WPE or WPA enabled. This must first be disabled in
the Wireless menu located in the Home directory.
To configure multiple SSID:
1. Disable WEP or WPA in the Wireless menu of the Home directory.
2. Click in the Enable Multiple SSID option box to select it.
3. Enter the SSID you want to add.
4. Click the Add button to add the SSID to the list.
5. Click the Apply button to enable the listed SSIDs.
To remove an SSID from the list, click the radio button in the left column of the list for the SSID to be removed
and click the Apply button.
Figure 4- 13. Wireless Management - Multiple SSID