D-Link DSL-G604T User Manual page 32

Now select the Connection Type for the Internet and enter your account User Name and Password. Your ISP has
given this information to you.
Connection Type: Dynamic IP Address
1. Do not change the VPI or VCI value unless you have been told to do so. These numbers are used to
define a unique path for your connection. If you have been given specific settings for this to configure,
type in the correct values assigned by your ISP.
2. Under Dynamic IP Address mode, choose the Connection Type from the pull-down menu. For
Dynamic IP mode connections the available encapsulation methods are 1483 Bridged IP LLC and 1483
Bridged IP VC-Mux.
3. Some ISP's may require you to use the original computer that was originally registered for the Internet
service. In this case, type in the MAC address of the computer that was used. To obtain the MAC
address of the computer, you can do the following.
For Windows XP/2000: Start → Run → cmd → OK
In the command prompt, type in ipconfig/all. The physical Address is the MAC address of the computer.
For Windows ME: Start → Run → command → OK
In the command prompt, type in ipconfig/all. The physical Address is the MAC address of the computer.
4. Click Next to proceed to the next page.