Dynamic Ip Address - D-Link DSL-G604T Quick Installation Manual

Using the Setup Wizard (continued)
You will need to select the Internet Connection Type. If you are unsure which type of
Internet Connection you have, please contact your Internet Service Provider. There are four
connection modes and settings vary depending on the connection type.
2c
1. Dynamic IP Address - see
2. Static IP Address - see
3. PPPoE/PPPoA - see
4. Bridge Mode - see
A checklist of necessary settings is provided in the Appendix. Contact your Internet Service
Provider to obtain the necessary details.
Step h
Select your Connection Type
and proceed to step h1, h2, h3,
or h4 depending upon your
connection type.
Click Next
Step h1

Dynamic IP Address

The DSL-G604T defaults to the
most commonly used values in the
United States.
Note: If the MAC address does not
appear, please refer to the User
Manual on the CD-ROM.
Click Clone MAC Address
Click Next
Step h1
Dynamic IP Address on page 8.
Static IP Address on page 9.
Step h2
PPPoE/PPPoA on page 9.
Step h3
Step h4 Bridge Mode on page 10.
8