D-Link DI-774 Quick Installation Manual page 2

Tri-mode dualband wireless router
Hide thumbs Also See for DI-774:
Table of Contents

Advertisement

Connecting The DI-774 Wireless Router To
Your Network
A.
First, connect the power adapter to the receptor at the back panel of the DI-774
and then plug the other end of the power adapter to a wall outlet or power strip. The
Power LED will turn ON to indicate proper operation.
B.
1. Power off your Cable or DSL modem; some devices may not have a on/off
switch and will require you to unplug the power adapter. Now, the DI-774 should be
powered on and the Cable / DSL modem should be turned off.
2. Cable / DSL modem
Connect an Ethernet cable to the Ethernet jack located on the Cable / DSL
modem. After the Ethernet cable is securely connected, power on the Cable / DSL
modem by turning on the unit or plugging in the power adapter.
3. Cable / DSL modem
Insert the other end of the Ethernet cable to the WAN PORT on the back panel of
the DI-774. The WAN LED light will illuminate to indicate proper connection. If the
WAN LED is not illuminated, please go back to step B and repeat its instructions.
C.
Insert an Ethernet cable to
available Ethernet port on the network adapter in the computer you will use to
configure the DI-774. The LED light for LAN Port 1 will illuminate to indicate proper
connection. (Note: The Ports on the DI-774 are Auto-MDI/MDIX. Meaning you can
use a straight-through or crossover Ethernet cable to the WAN and LAN Ports.)
D.
Computers equipped with D-Link 802.11a/b/g wireless adapters will be able to
connect to connect out of the box with the DI-774 using their default wireless
settings.
D.
Antennas
Used to
wirelessly
connect to
802.11a/b/g
adapters.
Reset Button
Pressing this button restores the Router to
its original factory default settings.
(Power
Off) – DI-774
(Power
On) – DI-774
LAN port 1 on the back panel of the
C.
LAN PORTS
These
are the connections
for Ethernet cables to
Ethernet enabled
computers.
2
(Power
On)
(Power
On)
B.
WAN PORT
This is for the connection
of an Ethernet cable to the
Cable or DSL modem
A.
Receptor for
Power
Adapter.
DI-774 and an

Advertisement

Table of Contents
loading

Table of Contents