Advertisement
The Setup Wizard (continued)
The Setup Wizard (continued)
The Setup Wizard (continued)
The Setup Wizard (continued)
The Setup Wizard (continued)
If your ISP uses
PPPoE
Point Protocol over Ethernet), and
this option is selected, then this
screen will appear: (Used mainly for
DSL Internet service.)
Please be sure to remove any
existing PPPoE client software
installed on your computers.
Enter in the username and password
provided to you by your ISP.
Click
Next
802.11g Wireless Setup
802.11g Wireless Setup
802.11g Wireless Setup
802.11g Wireless Setup
802.11g Wireless Setup
The default wireless settings for your
802.11g wireless network are:
SSID = default
Channel = 6
You can change these settings to
match an existing wireless network.
Click
Next
If you wish to use encryption for your
802.11g network, the DI-784 is
capable of three levels of wireless
encryption: 64-bit, 128-bit, and
152-bit. By default the encryption
is disabled. You can change the
encryption settings for more secure
wireless communication.
Click
Next
(Point-to-
7
Advertisement
