Acl > Acl Finder; Poe > Poe Port Settings (Only For Des-1210-08P/28P) - D-Link Web Smart DES-1210-28P Reference Manual

5 Configuration
ICMP Type: Specify the ICMP packet type.
ICMP Code: Specify the ICMP packet Code.
IGMP Type: Specify the IGMP packet type.
Source Port: Specify the TCP or UDP source port value.
Destination Port: Specify the TCP or UDP destination port value.
TCP Flag: Specify the TCP flag value.
Ports: Specify the switch ports that you want to implement the access rule to.
Action: Specify the ACL forwarding action matching the rule criteria. Permit is to forward packets if
all other ACL criteria are met. Deny is to drop packets if all other ACL criteria is met.
Click Apply to make it effective.
To modify an existing rule, please click on the Access ID hyperlink.
ACL > ACL Finder
This page is used to help find a previously configured ACL entry. To search for an entry, enter the profile ID
from the drop-down menu, select a port that you wish to view, define the state and click Find. The table on
the lower half of the screen will display the entries. To delete an entry click the corresponding Delete button.
PoE > PoE Port Settings (Only for DES-1210-08P/28P)
DES-1210-08P/28P supports Power over Ethernet (PoE) as defined by the IEEE specification. All ports of
DES-1210-08P and port 5-24 of DES-1210-28P comply with IEEE 802.3af providing up to 15.4watts of
power to Powered Devices (PD), and port 1-4 of DES-1210-28P comply with IEEE 802.3at providing up to
30watts of power to PDs. Both devices follow PSE (Power Supply Equipment) standard pinout Alternative A,
feeding PoE power through pins 1, 2, 3 and 6 of Category 5/5e or Category 3 UTP Ethernet cables.
As per the IEEE 802.3af/at standard, the PSE provides power according to the following classification:
NOTE: The switch proceeds the access rule from
the smallest access ID, so be careful in assigning
the ID for the expected results.
Figure 106 – ACL > Access Profile List > Access Rule List
Figure 107 – ACL > ACL Finder
Class Usage Maximum power used by PD
0 Default 15.4W
1 Optional 4.0W
2 Optional 7.0W
3 Optional 15.4W
4 Reserved 15.4W~30W
D-Link Web Smart Switch User Manual
64