Cabinet Disassembly Instructions - Philips BDP5320/F7 Service Manual

CABINET DISASSEMBLY INSTRUCTIONS

1. Disassembly Flowchart
This flowchart indicates the disassembly steps to gain
access to item(s) to be serviced. When reassembling,
follow the steps in reverse order. Bend, route, and
dress the cables as they were originally.
[1] Top Cover
[2] Front Unit
[6] Rear Panel
[8] BD Main CBA &
BD Mechanism Assembly
[9] AV CBA
[10] Power Supply CBA
2. Disassembly Method
ID/
Loc. Part
Fig.
No.
No.
[1] Top Cover D1 6(S-1)
[2] Front Unit D2
Front-A
[3] D3 *2(L-3)
CBA
Front-B
[4] D3 *4(L-4)
CBA
Front
[5] D3 ----------
Assembly
[6] Rear Panel D4
DC Fan
[7] D4
Motor
BD Main
CBA & BD
[8] D5
Mechanism
Assembly
[9] AV CBA D6
Power
[10] Supply D6 3(S-10), Power Cover
CBA
↓ ↓ ↓
(1) (2) (3)
[3] Front-A CBA
[4] Front-B CBA
[5] Front Assembly
[7] DC Fan Motor
Removal
Remove/*Unhook/
Unlock/Release/
Note
Unplug/Desolder
---
*4(L-1), *2(L-2),
*CN1004, *CN5000
---
(S-2), 3(S-3), (S-4),
2(S-5), *CN1005
(S-6), Fan Cover,
---
Fan Plate
4(S-7), 2(S-8),
*CN6101, *CN7101,
*CN7601
4(S-9), Desolder,
---
Main PCB Bracket
---
↓
(4) (5)
Note:
(1) Identification (location) No. of parts in the figures
(2) Name of the part
(3) Figure Number for reference
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to "Reference Notes."
Reference Notes
1. CAUTION 1: Locking Tabs (L-1), (L-2), (L-3) and
(L-4) are fragile. Be careful not to break them.
2. The BD Main CBA & BD Mechanism Assembly
is adjusted as a unit at factory. Therefore, do
not disassemble it. Replace the BD Main CBA
& BD Mechanism Assembly as a unit.
3. When reassembling, be sure to use the original
screws or specified screws listed in the parts
list.
(S-1)
1
1
1
[1] Top Cover
3
2
↓
1-5-1
(S-1)
(S-1)
Fig. D1
E5SK6DC