Smart Functions; Using Lg Smartthinq Application - LG WTG7532W Owner's Manual

SMART FUNCTIONS

Using LG SmartThinQ
Application
Things to check before using LG
SmartThinQ
• For appliances with the
1
Check the distance between the appliance
and the wireless router (Wi-Fi network).
• If the distance between the appliance and
the wireless router is too far, the signal
strength becomes weak. It may take a
long time to register or installation may fail
altogether.
2
Turn off the Mobile data or Cellular Data
on your smartphone.
• For iPhones, turn data off by going to
Settings → Cellular → Cellular Data.
3
Connect your smartphone to the wireless
router.
NOTE
• To verify the Wi-Fi connection, check that
• The appliance supports 2.4 GHz Wi-Fi
or logo
• LG SmartThinQ is not responsible for any
• If the appliance is having trouble connecting to
• The Wi-Fi connection may not connect or may
• The network connection may not work
• The surrounding wireless environment can
• The appliance cannot be registered due to
• If the firewall on your wireless router is
• The wireless network name (SSID) should be
Wi-Fi icon on the control panel is lit.
networks only. To check your network
frequency, contact your Internet service
provider or refer to your wireless router
manual.
network connection problems or any faults,
malfunctions, or errors caused by network
connection.
the Wi-Fi network, it may be too far from the
router. Purchase a Wi-Fi repeater (range
extender) to improve the Wi-Fi signal strength.
be interrupted because of the home network
environment.
properly depending on the Internet service
provider.
make the wireless network service run slowly.
problems with the wireless signal
transmission. Unplug the appliance and wait
about a minute before trying again.
enabled, disable the firewall or add an
exception to it.
a combination of English letters and numbers.
(Do not use special characters.)
EN
29