D-Link DIR-816 User Manual page 43

DIR-816 Wireless AC750 Dual Band Router with 3G/LTE
Support and USB Port
User Manual
In order to connect your device to a wireless router for extending the range of the existing wireless
network, on the Device mode page, from the Connection method list, select the Wi-Fi value.
Then from the Work mode list select the Repeater value. In this mode you can change the LAN
IP address, connect your device to another access point, set your own settings for the wireless
network in the 2.4GHz and 5GHz bands, and set your own password for access to the web-based
interface of the device.
In order to let wired PCs connected to your device access the network of a wireless router, on the
Device mode page, from the Connection method list, select the Wi-Fi value. Then from the
Work mode list select the Client value. In this mode you can change the LAN IP address, connect
your device to another access point and set your own password for access to the web-based
interface of the device.
When the operation mode is selected, click the NEXT button.
Figure 29. Selecting an operation mode. The Repeater mode.
Figure 30. Selecting an operation mode. The Client mode.
Page 43 of 215
Configuring via Web-based Interface