D-Link DIR-816 User Manual page 153

DIR-816 Wireless AC750 Dual Band Router with 3G/LTE
Support and USB Port
User Manual
If the SNMP manager operates over SNMPv2c, create a read-only community which will be used
by the SNMP manager to get data on the device. To do this, in the Communities section, click the
ADD button.
In the opened window, specify the community name in the Name field and click the SAVE button.
To change a community name, select the relevant line in the table. In the opened window, specify
the needed value of the Name field and click the SAVE button.
To remove a community, select the checkbox located to the left of the relevant line in the table and
click the DELETE button.
If the SNMP manager operates over SNMPv3, create a read-only user which will be used by the
SNMP manager to get data on the device. To do this, in the Users section, click the ADD button.
Figure 128. The window for adding a community.
Figure 129. The window for adding a user.
Page 153 of 215
Configuring via Web-based Interface