Lesson Settings - Casio CT-X700 User Manual

Using Built-in Songs to Master Keyboard Play
3.
Start Step Lesson (page EN-20) or No
Guidance play (page EN-21).
• This starts a lesson with the phrase you selected.
4.
To turn off the lesson phrase function, press
cm PHRASE again.
• This turns off the lesson phrase function.
Messages that Appear during Lessons
The following are the messages that appear on the display
during Step Lessons.
Message
<Phrase> Appears when you select a phrase, when a
lesson starts, etc.
• Note that certain phrases will cause
"<Wait>" to appear instead of "<Phrase>".
<Wait> Appears when the lesson starts with an intro
or fill-in phrase that is not included in the
phrases to be practiced. Play toll advance
automatically to the next phrase after the un-
included phrase plays, so wait until then to
start playing on the keyboard.
EN-22
Description

Lesson Settings

Turning Off Voice Fingering Guide
Use the following procedure to turn off voice fingering guide,
which tells you which finger to use to play each note in
Lesson 2 and Lesson 3.
1.
Press cs FUNCTION and then use the ct [2]
(o) and [3] (p) keys to display "Lesson".
L e s s o n
2.
Press the ct [6] (ENTER) key.
3.
Use the ct [2] (o) and [3] (p) keys to
display "Speak".
S
4.
Press the dk [–] key to select the off setting.
Turning Off Note Guide
Use the following procedure to turn off note guide, which
sounds the note to be played next in Lesson 2 and Lesson 3.
1.
Press cs FUNCTION and then use the ct [2]
(o) and [3] (p) keys to display "Lesson".
2.
Press ct [6] (ENTER) key.
3.
Use the ct [2] (o) and [3] (p) keys to
display "NoteGuid".
N o t e G u i d
4.
Press the dk [–] key to select the off setting.
e a k
p