Installation; Installing The Leveling Legs - Westinghouse QL0252 Owner's Manual

Installation

INSTALLING THE LEVELING LEGS

Carefully check the utility sink for damage and/or missing parts prior
to installation . If there is any damage or if you are missing parts,
do not proceed with the installation . Report damage and/or missing
parts immediately to the manufacturer . Do not dispose of packaging
before you are satisfied with your new utility sink.
- Remove the utility sink (B) and place it on a soft, protective
surface .
- Turn the cabinet (A) upside down onto a protective surface .
- Gently put each leveling leg (F) onto its proper location . Using
four leveling leg screws (H) on each . Attach the leveling legs (F)
to the bottom of the cabinet .
- Gently right the cabinet (A) .
QL0252
WARNING:
Always wear safety goggles and gloves during
installation .
H
F
A
6