D-Link DES-3226 User Manual page 32

Switch management module

Hide thumbs Also See for DES-3226:

Table of Contents

IfHCInBroadcastPkts is the number of packets, delivered by this sub-layer to

a higher (sub-) layer, which were addressed to a broadcast address at this sub-

layer. This object is a 64-bit version of ifInBroadcastPkts.

IfHCOutOctets is the total number of octets transmitted out of the interface,

including framing characters. This object is a 64-bit version of ifOutOctets.

IfHCOutUcastPkts is the total number of packets that higher-level protocols

requested be transmitted, and which were not addressed to a multicast or

broadcast address at this sub-layer, including those that were discarded or not

sent. This object is a 64-bit version of ifOutUcastPkts.

IfHCOutMulticastPkts is the total number of packets that higher-level

protocols requested be transmitted, and which were addressed to a multicast

address at this sub-layer, including those that were discarded or not sent. For a

MAC layer protocol, this includes both Group and Functional addresses. This

object is a 64-bit version of ifOutMulticastPkts.

IfHCOutBroadcastPkts is the total number of packets that higher-level

protocols requested be transmitted, and which were addressed to a broadcast

address at this sub-layer, including those that were discarded or not sent. This

object is a 64-bit version of ifOutBroadcastPkts.

IfLinkUpDownTrap Enable indicates whether linkup/linkDown traps should

be generated for this interface. By default, this object should have the value

enabled (1) or interfaces which do not operate on 'top' of any other interface (as

defined in the ifStackTable), and disabled(2) otherwise.

IfHighSpeed is an estimate of the interface's current bandwidth in units of

1,000,000 bits per second.

IfPromiscuous Mode is an object that has a value of false(2) if this interface

only accepts packets/frames that are addressed to this station. This object has a

value true(1) when the station accepts all packets/frames transmitted on the

media.

IfConnectorPresent is an object that has the value 'true(1)' if the interface

sublayer has a physical connector and the value 'false(2)' otherwise.

DES-3226 Management

Table of Contents