D-Link DCS-G900 Install Manual page 16

Add a New Camera DCS-G900 Install Guide
If you are unsure of the IP Address of the camera, you can click on Search to
search for all available cameras that are installed on your local area network.
Note: Only cameras on your local area network can be located using Search
in IPView SE. If you want to add a camera via the Internet, you must enter in a
public IP Address. Please note that if your camera is behind a router, you will
need to enter your router's WAN IP followed by a colon, then the port number that
is assigned to your camera. As in example 10.10.10.80:800, where 10.10.10.80
is your router's WAN IP and :800 is the port that your camera is using.
Highlight the camera you wish to add and click on Add. The camera will
automatically be added into the IPView SE list view. If you add the same
camera more than once you will receive the following message (see below).
16 D-Link Systems, Inc.