D-Link DCS-6620 Install Manual page 10

Camera Configuration (continued)
If the Installation Wizard does not display
any devices, you will need to find a
tool small enough to fit into the reset
hole and softly press down a switch for
2 cycles (about 5-7 seconds). The red
and green LEDs will blink continuously
and stop twice. Let go when the red
LED starts to flash the second time.
Once the camera appears,
select the camera by placing
a Checkmark in the box.
10
DCS-6620 Install Guide
Click Search to refresh the
list of cameras if needed.
D-Link Systems, Inc.