English Indications Are Used For The Purpose Of Explanation. You Can Select The Display Language From The [Function] Menu. ( 6) - Kenwood KDC-BT620U Instruction Manual

GETTING STARTED
P-OFF WAIT
(For
Applicable only when the demonstration mode is turned off.
Sets the duration when the unit will automatically turn off (while in
standby mode) to save the battery.
20M: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutes ; – – –: Cancels
CD READ 1: Automatically distinguishes between audio file disc and music CD. ;
2: Forces to play as a music CD. No sound can be heard if an audio file disc
is played.
F/W UPDATE
UPDATE SYSTEM
F/W UP xxxx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not
activated).
For details on how to update the firmware, visit
<www.kenwood.com/cs/ce/>.
FACTORY RESET YES: Resets the settings to default (except the stored station). ;
NO: Cancels.
CLOCK
CLOCK DISPLAY ON: The clock time is shown on the display even when the unit is turned
off. ; OFF: Cancels.
ENGLISH
Select the display language for [FUNCTION] menu and music information
2
РУССКИЙ*
if applicable.
By default, [ENGLISH] is selected.
TURKCE
* 2
Selectable only for
2
ESPANOL*
6
ENGLISH
)
.
Change the crossover type
1 Press repeatedly to enter STANDBY.
2 Press and hold number buttons 4 and 5 to enter crossover select.
The current crossover type appears.
3 Turn the volume knob to select "2WAY" or "3WAY", then press the
knob.
4 Turn the volume knob to select "YES" or "NO", then press the knob.
The selected crossover type appears.
• To cancel, press and hold
• To adjust the selected crossover settings, ( 23, 24).
Caution
Select a crossover type according to how the speakers are connected.
( 34 — 36)
If you select a wrong type:
• The speakers may damage.
• The output sound level may be extremely high or low.
.