TrekStor SURFTAB BREEZE 7.0 QUAD LTE Operating Instructions Manual page 30

The Surftab searches for all available Bluetooth devices nearby and then
displays them as a list.
e) Tap the device that you wish to connect to. The Surftab establishes
a connection with the selected device and sends what is known as a
"B
f) Check that the code displayed on the device to be connected matches the
code displayed on the Surftab and con irm on the Surftab by tapping
"P ".
NOTICE
You may also have to confirm the pairing procedure on the device you want to
connect to.
g) Once a connection has been established, the connected device appears
at the very top of the Surftab Bluetooth menu under the heading "P
".
h) Exit Settings by returning to the start screen (see Section 9).
i) Open the ile explorer app ("F
j) Scroll to the image you want to send via Bluetooth.
k) Tap the image to open it. Select "G
l) The Bluetooth symbol is located in the upper right of the image:
m) Tap the symbol.
n) A list of all connected Bluetooth devices appears.
o) Tap the device you want to send the image to. The Surftab will send the
selected ile to the required device.
p) You may have to con irm receipt of the image on the destination device.
NOTICE
Deactivate the Bluetooth function on both devices after successful transfer
in order to save power. To deactivate the Bluetooth function on the Surftab, in
the Bluetooth menu top right, use the tip of your finger to move the slider for
Bluetooth from right to left. The word "O " appears in the top left of the screen.
" to the device you want to connect to.
M ") in the Applications menu.
" and tap "J
30
".