ASROCK IMB-156 User Manual page 15

ATX/AT Mode Select
(3-pin PWR_JP1)
(see p.8 No. 22)
Panel Power Select (LCD_VCC)
(5-pin PNL_PWR1)
(see p.8 No. 10)
Backlight Power Select
(LCD_BLT_VCC)
(5-pin BKT_PWR1)
(see p.8 No. 19)
Backlight Control Level (CON_LBKLT_CTL)
(3-pin BLT_PWM1)
(see p.8, No. 6)
COM Port PWR Setting Jumpers
(3-pin PWR_COM1, for COM Port1)
(3-pin PWR_COM2, for COM Port2)
(3-pin PWR_COM3, for COM Port3)
(see p.8, No. 35)
(3-pin PWR_COM4, for COM Port4)
(3-pin PWR_COM5, for COM Port5)
(3-pin PWR_COM6, for COM Port6)
(see p.8, No. 14)
USB Power Setting Jumpers
(3-pin USB2_PWR_H1, USB2_PWR_H2)
(see p.8, No. 29)
(3-pin USB3_PWR_H1, USB3_PWR_H2)
(see p.8, No. 33)
1-2: AT Mode
2-3: ATX Mode
Use this to set up the VDD
power of the LVDS connector.
1-2: LVDD: +3V
2-3: LVDD: +5V
4-5: LVDD: +12V
Use this to set up the backlight
power of the LVDS connector
and the panel backlight power
of BLT_PWM1.
1-2: LCD_BLT_VCC: +5V
2-3: LCD_BLT_VCC: +12V
4-5: LCD_BLT_VCC: DC_IN
1-2: +3V Level
2-3: +5V Level
1-2: +5V
2-3: +12V
1-2: +5V
2-3: +12V
1-2: +5V
2-3: +5VSB
1-2: +5V
2-3: +5VSB
15