Configuring On Windows 2000/Xp Platforms - D-Link DI-704P Quick Installation Manual

Configuring on Windows 98se/Me Platforms (continued)
Click on the
Details tab
Choose the "PRTmate: (All-in-1)"
from the list attached at the Print
To item. Be sure that the Printer
Driver item is configured to the
correct driver of your printer server.
Click Port Settings
Type in the IP address of the
DI-704P.
Click OK

Configuring on Windows 2000/XP Platforms

Click Port
The configuration procedure for a
Windows 2000/XP platform is similar to
that of Windows 95/98 except the
screen of printer Properties:
Click Configure Port
Type in the IP address of the
DI-704P.
Click OK
(Note: Screen shots are taken in Windows 2000,
similar screens will appear in Windows XP.)
11