Mercedes-Benz GLS Operator's Manual page 319

You can find more information in the separate
mbrace manual.
The system has not been able to initiate a Road-
side Assistance call, if:
the F indicator lamp for the Roadside
R
Assistance call button is flashing continu-
ously.
no voice connection to the Mercedes-Benz
R
Customer Assistance Center was estab-
lished.
This can occur if the relevant mobile phone net-
work is not available, for example.
The Call Failed message appears in the mul-
tifunction display.
To end a call: press the ~ button on the
X
multifunction steering wheel.
or
Press the corresponding multimedia system
X
button for ending a phone call.
Info call button
To call: press Info call button :.
X
This initiates a call to the Mercedes-Benz Cus-
tomer Assistance Center.
The indicator lamp in Info call button :
flashes while the connection is being made.
The Connecting Call
the multifunction display. The audio output is
muted.
If a connection can be established, the
Connected message appears in the multifunc-
tion display.
If a mobile phone network and GPS reception
are available, the system transfers data to the
Mercedes-Benz Customer Assistance Center,
for example:
Current location of the vehicle
R
Vehicle identification number
R
message appears in
Call
The multimedia system display indicates that a
call is active. During the call, you can change to
the navigation menu by pressing the NAVI but-
ton on COMAND, for example.
Voice output is not available in this case.
A voice connection is established between the
Mercedes-Benz Customer Assistance Center
and the vehicle occupants.
You receive information about operating your
vehicle, about the nearest Mercedes-Benz Ser-
vice Center and about other products and serv-
ices from Mercedes-Benz.
You can find further information on the mbrace
system under "Owners Online" at
http://www.mbusa.com.
The system was unable to initiate an Info call if:
the indicator lamp in the ï Info call button
R
is flashing continuously.
no voice connection to the Mercedes-Benz
R
Customer Assistance Center has been estab-
lished.
This can occur if the relevant mobile phone net-
work is not available, for example.
The Call Failed message appears in the mul-
tifunction display.
To end a call: press the ~ button on the
X
multifunction steering wheel.
or
Press the corresponding multimedia system
X
button for ending a phone call.
Call priority
When service calls are active, e.g. Roadside
Assistance or Info calls, an emergency call can
still be initiated. In this case, an emergency call
will take priority and override all other active
calls.
The indicator lamp of the respective button
flashes until the call is ended.
An emergency call can only be terminated by the
Mercedes-Benz Customer Assistance Center.
All other calls can be ended by pressing:
the ~ button on the multifunction steering
R
wheel
the corresponding button in the multimedia
R
system to end the voice call
When a call is initiated, the audio system is
muted.
Features
317
Z