Mercedes-Benz GLS Operator's Manual page 299

Authorization by entering a passkey (passcode):
Select the Bluetooth
X
phone.
The input menu for the passkey is displayed.
Choose a one to sixteen-digit number combi-
X
nation as a passkey.
Enter the passkey on the multimedia system.
X
Press ¬ to confirm.
X
Enter and confirm the passkey on the mobile
X
phone. Depending on the mobile phone used,
confirm the connection to the multimedia sys-
tem and for the PBAP and MAP Bluetooth
profiles. The prompt to confirm may take up
to two minutes to be displayed (see the man-
ufacturer's operating instructions).
Connecting a mobile phone (Audio 20)
Requirements
For telephony via the Bluetooth
require at least one Bluetooth
phone depending on use of one-telephone
mode or two-telephone mode. The mobile
phone must support Hands-Free Profile 1.0 or
above.
In two-telephone mode you can use all the
functions of the multimedia system with the
main telephone. With the additional tele-
phone, you can receive incoming calls.
Multimedia system:
Select VehicleQSystem Set‐
X
tingsQActivate
®
Activate Bluetooth
X
Mobile phone:
®
Activate Bluetooth
X
®
tooth visibility for other devices (see the
manufacturer's operating instructions).
®
The Bluetooth device names for all of one man-
ufacturer's products might be identical. To
make it possible to clearly identify your mobile
phone, change the device name (see the man-
ufacturer's operating instructions).
®
name of the mobile
®
®
interface, you
®
-capable mobile
Bluetooth.
O.
and, if necessary, Blue-
Operating system
If the mobile phone supports the PBAP (Phone
Book Access Profile) and MAP (Message
Access Profile) Bluetooth
ing information is transmitted after you connect
the main telephone:
Phone book
R
Call lists
R
Text messages and e-mail
R
i
Further information on suitable mobile
phones can be found at: http://
www.mercedes-benz.com/connect
i
In the USA, you can get in touch with the
Mercedes-Benz Customer Assistance Center
on 1-800-FOR-MERCedes (1-800-367-6372).
In Canada, you can get in touch with the Cus-
tomer Relations Center on 1-800-387-0100.
Searching for and authorizing (connect-
ing) a mobile phone
Before using your mobile phone with the multi-
media system for the first time, you will need to
search for the phone and then authorize (con-
nect) it. Depending on the mobile phone, author-
ization either takes place by means of Secure
Simple Pairing or by entering a passkey. The
multimedia system automatically makes the
procedure that is relevant for your mobile phone
available. The mobile phone is always connec-
ted automatically after authorization. Further
information on using a mobile phone with the
multimedia system (see the Digital Operator's
Manual).
If the multimedia system does not detect your
mobile phone, this may be due to particular
security settings on your mobile phone (see the
manufacturer's operating instructions).
Searching for a mobile phone
Multimedia system:
Select Tel/®QConn. DeviceQCon‐
X
nect New Device.
Select Connect via
X
Select mobile phone.
X
Connecting a mobile phone
One-telephone mode: select
X
New Main Phone.
Two-telephone mode: select
X
Additional Phone
already connected.
®
profiles, the follow-
Vehicle.
Connect as
Connect as
when a mobile phone is
Z
297