Table of Contents
Advertisement
■
Other Sat. / Satellite
To use dual tuner function, set
●
1. Select
Auto Setup
2. Select the satellite.
Select
IN 1
/
IN 2
●
Selectable satellites are Astra2/Eurobird,
●
Check the dish alignment for the satellite to select.
●
– The Freesat channel uses Astra2 at 28.2° East and Eurobird1
at 28.5° East satellites. To ensure your satellite dish is correctly
installed, consult your Freesat registered dealer. (UK only)
– For information about
satellite broadcasting companies.
If you want to tune from all available satellites, select
●
3. Select
Start
and press
4. The signal condition is displayed and press
If you select
Any
●
It takes a while to check the connection for your selected satellite.
●
Ensure that the
●
locked, the search cannot be executed.
If the status is shown as
●
Strength
have no indications, please check the dish alignment. If the
status is shown as
Quality
/
Signal Strength
again.
5. A confirmation screen is displayed and press
6. Select a search mode and press
made automatically.)
If you select
Astra2/Eurobird
●
be searched.
When the operation is completed, the channel at the lowest position will
●
be displayed.
Dual Tuner Mode
and press
OK
to access.
in
Signal Input
to set for each tuner.
Astra1
and Hotbird, consult the received
OK
to access.
Satellite, this step is skipped.
Signal Lock
status is shown as Locked. If it is not
Not locked
Not locked
but there are some levels of
indicated, select
OK
to start
or
Any
- 123 -
to On.
Astra1
and Hotbird.
Any
OK
to access.
and
Signal Quality
/
Any Satellite
in step 2 and try
OK
to access.
Auto
Setup. (Settings are
Satellite, Freesat channels will also
Satellite.
Signal
Signal
Advertisement
Table of Contents
