Setting The Clock; Setting The Alarm; Viewing Video Or Photos - Curtis iP220 Instruction Manual

Operations

Setting the Clock

a.
With the power off, hold the CLOCK SET button.
b. Press the SEARCH/TUNE down or up buttons to toggle between 12HR and 24HR
time, and press the MEM/CLK SET button to select either option.
c. Press the SEARCH/TUNE up button to cycle up through the hours, or press the
SEARCH/TUNE down button to cycle down through the hours. Press the MEM/
CLK SET button to select the hour.
d. Press the SEARCH/TUNE up button to cycle up through the minutes, or press the
SEARCH/TUNE down button to cycle down through the minutes. Press the MEM/
CLK SET button to select the minute, and finish setting the time.

Setting the Alarm

a.
Press the ALARM SET 1 button.
b.
Press and hold he ALARM SET 1 button.
c.
Press the SEARCH/TUNE up button to cycle up through the hours, or press the
SEARCH/TUNE down button to cycle down through the hours. Press the ALARM
SET 1 button to select the hour.
d.
Press the SEARCH/TUNE up button to cycle up through the minutes, or press the
SEARCH/TUNE down button to cycle down through the minutes. Press the ALARM
SET 1 button to select he minute.
e.
Press the SEARCH/TUNE up button to cycle up through the different alarm modes
(Radio, Buzzer, or iPod). After a mode is selected press the ALARM SET 1 button
to finish setting the alarm.
NOTES: This operation also applies to setting alarm two.
Viewing Video or Photos from your iPod on an External Device
a.
Using a video cable, connect an external device such as a TV to the Video Output on
the unit.
b. Insert your iPod with video or photo capabilities into the iPod Docking Station with
the appropriate insert.
c. You will now be able to control our iPod from the unit control panel. Using the PLAY
/ PAUSE, SEARCH/TUNE up or down buttons you can move from one video or
photograph to the next, play, and pause.
8
continued