Curtis iP220 Instruction Manual page 9

Operations
Connecting Other Digital Audio Devices
a.
Use a line-in cord to connect an iPod shuffle or other audio device to the AUX-IN
port.
b. Press the FUNCTION button to activate the AUX-IN.
c. The iPod shuffle or other audio device will now play through the speakers of the
unit.
How to Using Radio
a.
Power on the unit, press the FUNCTION button to radio mode.
b. Using the BAND button to switch between AM / FM Band.
c. Automatic Tuning - Press and hold the SEARCH/TUNE up or down buttons until
the display begins to move, then release the buttons. The tuner will scan up or down
the band until it finds the first strong station, and then stop on that station. Repeat this
process until the tuner stops on your desired station.
d. Manual Tuning - Press and release the SEARCH/TUNE up or down buttons repeatedly
until the display is showing the frequency of your desired station. Use the manual
tuning method to tune to weaker stations that are bypassed during Automatic Tuning.
Antennas
AM - If reception is weak, turn the unit to improve reception. FM - If
reception is weak, adjust FM Wire Antenna length and the angle to improve reception.
Programming radio station presets
You can program as many as 10 FM and 10 AM radio station presets.
a.
During RADIO mode, press BAND button to select AM/FM band.
b.
Press the SEARCH/TUNE up or down buttons to desire station you want store.
c.
Press and hold the MEM/CLK SET button to activate the programming mode.
d.
Press the SEARCH/TUNE up or down buttons to select the preset number you want
to store.
e.
Press and hold the MEM/CLK SET button to store the station.
f.
Repeat Steps "b" through "e" to program additional presets.
To recall the radio station preset
Press the M-DN(REAPEAT) or M-UP (PLAY/PAUSE/P+) Button repeatedly until the
preset number you want appears on the display and the preset station will be sound.
9