3. Remove one screw and then the strap.
4. Remove the key unit.
* Key unit is fixed by the two sided tape.
Strap
Screw (S3)
Key unit
5. Remove 5 screws and then the front panel.
Screw (S1)
Screws (S1)
Screws (S1)
6. Remove 3 screws and then the camring and the LED cover.
Screw (S7)
Screws (S5)
7. Remove the clamp board (L).
8. Remove the clamp board (R).
Clamp board (L)
Clamp board (R)
— 20 —