Lexmark S400 Series
System board removal
CAUTION: POTENTIAL INJURY
This device contains a lithium battery. There is a danger of explosion if a lithium battery is
incorrectly replaced. Replace it only with the same or equivalent type of lithium battery.
Discard used batteries according to the manufacturer's instructions and local regulations.
1. Remove the ADF/scanner assembly. See
2. Remove the midframe. See
3. Remove the operator panel. See
4. RFID card. See
5. Remove the print engine. See
6. Remove the five screws (A) from the system board shield.
7. Remove the system board shield.
4-28
Service Manual
"ADF/scanner assembly removal" on page
"Midframe removal" on page
"Operator panel removal" on page
"RFID card removal" on page
"Print engine removal" on page
4-11.
4-18.
4-27.
4-19.
A
4-3.