Quickstart Guide (English) Introduction Thank you for purchasing the Bronco LP. At ION, your entertainment is as important to us as it is to you. That’s why we design our products with one thing in mind—to make your life more fun and more convenient.
Page 3
Features Top Panel Platter: Place your record here. 45 RPM Adapter Holder: Holds the included 45 RPM adapter. When not using the adapter, please place it in this holder. Tonearm: The fixed tonearm can be raised and lowered by hand, or by pressing the raise / lower lever.
Front Panel 18 19 Standby LED: This LED will illuminate when the unit is powered on. Phono LED: This LED will illuminate when Phono is selected with the Source button. USB LED: This LED will illuminate when USB is selected with the Source button. Aux LED: This LED will illuminate when Aux is selected with the Source button.
21. Line Output: Connect this output to a receiver, amplifier, or powered speakers. Note: Bronco LP’s volume control will not adjust the volume when the line output is in use. 22. FM Antenna: Adjust this wire for better FM radio reception. For AM reception, rotate the unit until the best reception is found.
Connect an 1/8” (3.5 mm) stereo audio cable (not included) from the Aux In on the front panel of Bronco LP to the line output or headphone output of your external audio device to be able to listen to the external source through Bronco LP’s internal speakers.